WoodLand Roofers

Category: Roofers in Conroe Texas

  • Learn How To Prolong The Life of Your Tile Roof!

    Learn How To Prolong The Life of Your Tile Roof!

    A tile roof installation is a wonderful addition to your home that can give it traditional character and greatly improve its appearance.

    Tile is also a favorable choice for roofing replacement due to its energy-efficiency and durability.

    To get a full life out of your tile roof, it’s critical that it receive proper care as if it is ignored, that beautiful tile will deteriorate sooner than it should.

    Prolong the roof of your tile roof and reduce the need for costly repair by following these important tile roof maintenance tips!

    Tip #1 – Stay Off That Tile!

    The number one way to damage a beautiful tile roof is to walk on it as those tiles are a lot more delicate than they may appear; one wrong step can cause them to crack or break under your feet!

    When you have a roofing company install tile, do so knowing that you should always call a professional to do close-up inspections and any needed maintenance or repairs as they have the training and know-how to reach all parts of tile roofs without damaging them.

    Tip #2 – Keep It Clean

    Roof tiles are made from porous, organic material that can hold moisture and other material that promotes the growth of moss and algae which can stain and deteriorate tiles over time.

    Dirt and other debris can collect on the tiles and rot after a period of time.

    To prevent these conditions and keep your tile roof looking and top-performing, it’s essential to clean it periodically and apply a sealant to preserve the surface.

    Since these cleanings must be performed carefully and should never be done with a pressure washer, it’s recommended that you hire tile roofing services to do it for you.

    Tip #3 – Keep the Trees Trimmed

    Trees are responsible for a lot of the damage that can occur to tile roofs as their branches can rub and scrape the tiles as well as break or lift them, while leaves left behind can add to organic debris that can rot and promote algae growth.

    The easiest way to reduce this kind of damage is to keep all trees close to the building well pruned so the branches cannot touch and leaves won’t fall on the roof.

    Tip #4 – Inspect Tile Regularly

    Because tile is more susceptible to damage than asphalt shingles and metal roofs, have your roof professionally inspected at least every two years by a roofing company that can get up high and take a closer look.

    In between those inspections, do your own visual inspection after storms; if anything seems unusual, ask your roofer to check it out right away to prevent further roof damage.

    Tip #5 – Keep Up With Repairs

    If you discover cracked or broken tiles during one of your inspections or any other damage to your tile roof, arrange for roof repair immediately.

    Damage left unrepaired can result in additional damage due to leaking and destruction of the adhesive under other tiles in that area.

    This can lead to more broken tiles and leaks that can slowly do widespread damage over a much larger area.

    Good Care Encourages Tile Roof Longevity

    Ceramic and pottery tile roofs can last almost a lifetime when installed correctly by a skilled roofer and then properly maintained afterward.

    Failure to maintain tile roofs can lead to serious damage over time, shortening their serviceable life so that you need a roof replacement sooner than you should.

    Using these five simple tips, your roof will stay in great condition and remain a beautiful part of your home!

  • Commercial Roofers Talk About Roofs And HVAC Units!

    Roofers in The Woodlands Texas

    Most commercial buildings have HVAC units installed on the roof. This makes such units accessible, prevents tampering by anyone on the ground, and allows for proper exhaust and ventilation so they run efficiently. HVAC rooftop installation is a practical commercial solution; however, many roofers find that it can predispose a building to roofing problems.

    Those resulting problems can heighten the need for repairs by roofer services because of a number of known issues caused by rooftop HVAC installations.

    Moisture Problems

    HVAC units remove moisture from the air inside a building; the resulting drained condensation is moved to the outside. When installed on a roof, drained water runs onto the surface of the roof, often pooling around the unit.

    Roofers find this to be a common cause of leaks, especially if a unit was installed after the initial building construction or when the original unit was replaced. Between added surface condensation and the possibility of surface trauma from installation and maintenance, leaks are a concern in these situations.

    Trauma to the Membrane

    Because installation is done on a flat roof surface that includes some type of membrane often covered with gravel, HVAC installation and maintenance is a primary cause of trauma to the membrane surface for a number of reasons.

    • To securely attach these units, the roof must be drilled through which creates new areas that may leak if not properly protected.
    • Roofer services find that contractors walking and working on the top of the building can damage the membrane, causing surface splits and cracks. Not all contractors are trained to protect a flat roof surface when doing maintenance or making repairs on the HVAC.

    Either situation can result in serious issues later on and the need to bring in roofers to make repairs.

    Improper Installation

    Roofer services that make repairs find HVAC installations have often been done with no regard for roof protection or no way to drain condensation from the unit. Many HVAC contractors may not understand just how fragile the membrane system actually is and the various techniques that must be used for damage protection.

    Improper installation can cause tears around the installation area, add to wind uplift of the membrane surrounding the unit, and decrease snow load handling ability of that portion of the roof.

    In light of all these possibilities, HVAC installation must be done carefully by contractors who know how to protect the roof surface. To reduce the possibility of damage that can result in a need for repair by roofer services, it is best that HVAC work be done alongside a qualified roofer, especially when such work is not part of a new construction.

    Experienced commercial roofers play an important role in helping ensure there is proper drainage, well-protected attachment points, and unit placement where it will not cause the membrane surface to be damaged or fail!

    Problems With A Commercial Roof in The Woodlands TX?

    GMA Restoration Offers Expert Commercial Roofer Services!

    Call (832) 410-4633!

  • Roofers Installing Metal Roofing – Avoid These 5 Common Mistakes!

    Roofers in The Woodlands Texas

    Metal panels and shingles make an attractive and highly durable roofing option. They are a popular choice for both homes and some commercial buildings. Yet metal may experience certain problems if the roofers do not install it properly. As simple as it may seem to apply, metal panels must be carefully installed by experienced metal roofer services to avoid five common mistakes that negatively affect these roofs.

    1. Improperly Set Screws

    The most common mistake made by roofers when installing metal panels is setting the screws incorrectly. Per manufacturer directions, the screws need to be put in just tight enough without being set too tightly, which could damage the washers. When they are set too loosely, the panels can move around. Both instances can result in leaks and substantial wind damage if the panels are loose. This is one of the main reasons why it is so important to work with metal roofer services that have experience installing this material.

    2. Improper Overhang Length

    Another common mistake of inexperienced roofers is making the overhang too short or too long. Metal panels should always overhang evenly by one to two inches to offer the best protection for everything underneath. If they hang over longer, drainage problems may result. If they do not hang over at all, water rolling off the roof can seep under the edges and be absorbed by the underlayment and decking.

    3. Improper Flashing Attachment

    Flashing is just as important on metal roofs as it is on any other type of building tops. This flashing is often poorly applied so the metal lips do not overlap properly or the flashing is not securely affixed. Installing flashing on metal roofs can be challenging. To get it right, these protective strips need to be properly overlapped and screwed down so they prevent water from getting under the seams yet stay secure in the wind.

    4. Improper Attachment and Sealing of Pipe Flashing

    In addition to improper overlapping of regular flashing, metal installations require that extra attention be paid to the flashing set around pipe vents and other protrusions. Many lesser-experienced metal roofer services may attempt to seal these areas with some kind of adhesive or roof sealant, which is incorrect. Flashing around pipes must be carefully fitted and screwed down onto the panels to create a watertight covering.

    5. Improper Use of Sealants

    Metal panels must be trimmed, placed, and overlapped correctly for them to be watertight. Sealant should be used sparingly to close up small openings rather than as a main means of closing gaps caused by improper trimming or overlay. Contractors who are less experienced with these installations may resort to the overuse of adhesives and sealants to close off openings caused by improper panel placement. This leaves the entire roof at risk for leaks and increases the chance that poorly overlaid panels will shift over time.

    Before contracting roofers to apply metal panels or shingles, home and building owners should make sure their contractor is an expert in this type of installation. Experienced metal roofer services understand the many challenges of installing this material and know how to avoid the most common and significant mistakes. For the best installation of a metal roof, always work with a well-qualified contractor!

    Thinking Of A Metal Roof In The Woodlands Texas?

    The Roofers At GMA Restoration Are Experienced Metal Installers!

    Call (832) 410-4633!